BLACK GOLD IP PRODUCT RANGE

Black Gold’s Hydraulic Anchor is simple to install and simple to extract with strong holding power to maximize pump

efficiency. Our engineered large bypass area eliminates gas problems and allows for the use of survey tools. With no surface manipulation needed, the anchor utilizes the weight of the fluid column to set. This compensating anchor can reset itself downwards but will not move upwards when actuated.

Designed to centralize the polished rod in pumping tee to prevent uneven wear of

the stuffing box rubbers and extends its running life. It also prevents catastrophic blowout of stuffing box rubbers while creating a differential pressure between the flow line and the stuffing box. We had tested an estimated 70% pressure decrease under the stuffing box.

Black Gold Pump & Supply’s Barrel Length Plunger Pump is designed to improve pump efficiency and run times in the presence of sand, scale, and/or trash. The plunger assembly is designed to keep sand in suspension and to prevent sand from settling between the plunger and barrel. The plunger is wiped clean after every downstroke, mitigating the

possibility of a stuck pump. Traveling and standing valve cages have a double valve to increase the potential run life of the pump.

The impact resistant cage was named because of its unparalleled resilience to

beating out. Compared to hard line cages, the insert demonstrates elasticity and

absorbs impact energy rather than deforming of chipping. This eliminates scoring or stuck plunges as a result of chipped hard lined cages. Design to perform, the insert features no windows, preventing erosion/corrosion to the shell of the cage. The insert is designed with a “full open” geometry, maximizing flow area and preventing scale buildup.

As polished rods may flex due to misalignment, polished rod failures may occur at the bottom thread of the polished rod. Installed between the

polished rod and the remainder of the rod string, Black Gold’s polished rod collet bushing eliminates the risk of polished rod pin failures. The polished rod pin is threaded into the collet body. The nut is threaded onto the body, wedging the tabs between the nut and the polished rod. This specific design is tailored to have maximum holding strength as more tensile forces are applied to the collet bushing.

When it comes to backflow prevention in flowline, Black Gold Pump & Supply, Inc.’s Flowline Check Valve (CV) is a reliable and excellent solution. The check valve remains open during normal operation until the tubing pressure drops below the flowline pressure, in which case it closes to prevent fluid from returning downhole.